PoE 및 IP OVER COAX 컨버터 - POE IP Over Coax 컨버터는 기존 동축 케이블을 사용하면서 아날로그 시스템을 IP 감시 시스템으로 업그레이드하는 데 사용할 수 있습니다. RG59, RG6, RG11 케이블과 호환됩니다. POE 표준 802.3af(PoE) 및 802.3at(PoE+)를 지원합니다.
POE 및 IP OVER TWIST PAIR 컨버터 - 각 쌍의 EOC(Ethernet over Coax) 컨버터에는 2개의 BNC to Twist Pair 커넥터가 장착되어 있어 POE over Twist Pair 전송이 가능합니다. 100m 일반 트위스트 페어 케이블에서 100Mbps 대역폭, POE 또는 NON-POE 장치 모두 453m에서 10Mbps 대역폭입니다. 엘리베이터 카트의 CCTV 시스템에 이상적입니다.
내장형 방열판이 있는 산업 디자인 - 내장형 방열판이 있는 산업 디자인은 뛰어난 안정성과 번거로움 없는 전송을 보장합니다. 실내에서만 사용하세요. 플러그 앤 플레이, 구성 불필요, 설치가 가장 간단합니다. 소형 디자인과 가벼운 무게.
포인트 투 포인트 연결 전용 - 포인트 투 포인트 연결에서 MoCA(Multimedia over Coax)로 작동하고, 동축 케이블을 통해 비디오/오디오/데이터/제어 신호를 전송하므로 트위스트 페어와 함께 사용됩니다. EOC 수신기는 POE 스위치 또는 POE 인젝터로 전원을 공급해야 하며, 송신기는 POE 장치 또는 비 POE 장치에 연결해야 합니다.
응용 프로그램
기존 동축 케이블을 교체하지 않고 아날로그 시스템을 IP 감시 시스템으로 업그레이드하는 데 사용됩니다.
이더넷 케이블과 카메라 전원이 없는 엘리베이터 응용 프로그램에 적합하며, 동축 또는 트위스트 페어 케이블을 통해 POE 전원과 IP 데이터를 전송할 수 있습니다.
POE-Splitter1224와 함께 작동하여 비 POE DC12V 장치에 POE 전원 + 데이터를 전송할 수 있습니다.
동축 케이블 또는 트위스트 페어 케이블을 통해 최대 1,000m의 이더넷 데이터 익스텐더(대역폭은 300m에서 10Mbps로 낮아짐).
ePoE 카메라에는 통합 EOC 송신기가 있습니다. EOC 수신기와 함께 작동하면 동축 케이블을 통해 최대 3,300피트(1000m)까지 전력과 데이터를 전송할 수 있습니다.
This item is currently on backorder but you can still purchase it now and we'll ship as soon as more become available.
Linovision EOC-Converter is a combination of Power over Coax (PoC) and Ethernet over Coax (EOC) converter. With proprietary ePOE technology, it is designed to transmit both PoE power and ethernet data over coaxial cables or twisted pair cables, including siamese cable, CATV cable, power cable, Cat5E/Cat6, etc. The max transmission distance can be 3,300ft. It is super useful to upgrade the analog camera system to an IP surveillance system without replacing legacy coaxial cables. It can also be used in elevators to get power and network from coax or twisted pair cables.
Unique Features Compared with Competitors
Industrial design
Industrial design, with built-in heat sink Ensure super reliability and hassle-free transmission.
POE power + Data transmission
It can Provide power to remote POE device with max. 30W and no local DC power adapter is required. （Note: The POE OUT Port only support PoE Mode A）
Transmission Performance
Compatible to IEEE802.3af/IEEE802.3at POE protocol, max21W POE load capacity in 100m(330ft), or 11W POE load capacity in 300m(1000ft).
DIN-Rail Installation
DIN-Rail Installation. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
General EOC Applications
Upgrade traditional analogue video surveillance system to IP surveillance system with existing coaxial cable at max 3,000ft distance.Up to100Mbps bandwidth over 1,000 feet regular coax cable transmission, working with CCA/CCU RG59/RG6 cable
There are some locations that are without network cables but still need POE power and data transmission, for example, elevator carts in many buildings, or doorbell cables, LINOVISION EOC converters are perfect for this application. It can transmit POE power and IP data over coax RG59 cable, twisted pair cable, doorbell cable, telephone cable, or even power cables. The remote-connected device can be IP cameras, IP Video intercoms, IP phones, IP controllers, etc.
1. Over twisted Pair Cable
2. Application for Non-POE
3. For POE VoIP Phone over coax / twist pair cables
4. POE power + Data transmission for non-POE DC12V Devices
5.Long Reach PoE up to 3,300ft
6. Power + Data bi-direction transmission to POE Wi-Fi AP (48V POE device only)
7. For ePoE IP camera over Coaxial Cable
8.For multiple PoE over Coax Cables application in one system
Application in Elevator
For many elevators there are no ethernet cables and no camera powers in the elevator cart, LINOVISION EOC converters are perfect for this application. It can transmit POE power and IP data over coaxial or twist pair cables. One passive EOC-transmitter will be put inside the elevator cart to feed the camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR. For multiple elevators application, one EOC-Switch08 or EOC-Switch24 will be put in the control room, working together with max 8 elevators.
Package includes
Comparison
Comparison between LINOVISION EOC and similar products
Model
EOC-Converter
MoCA Adapter
GCA-6000KITb
Ve***ty VHW-HWPS-B/C
A**S T8640
Transimit POE
✔
NO(ethernet only)
NO(ethernet only)
✔
✔
Transmission Distance
3000ft
300ft
2600ft
1000ft or 1600ft with power supply
1000ft
Without extra DC power
✔
/
/
Optional
✔
Price
$
$
$
$$$
$$$$
Use Tips
Use good quality IEEE802.3at 30W PoE switch to provide POE power to our EOC-Receiver, preferred with the DC53V input voltage, instead of regular 48V input voltage. Please also check the PoE budget of the PoE Switch, and make sure that the port individually can output 30W PoE power. (Most PoE Switches in the market do not support all ports at 30W POE output). Use point-to-point direct coaxial cable. The cable and connector quality will heavily affect the transmission distance. Please make sure to connect EOC-Receiver to the POE switch, and then connect the PoE cameras to the EOC-Transmitter side. The PoE output from the EOC-Transmitter is PoE mode A (use Pin 1,2,3, 6 for both data and power). If your PoE device is PoE mode B, please use our POE-Splitter or PoE-Extender02. The PoE output is standard IEEE802.3af/at PoE, and not compatible with 24V passive PoE devices.
Linovision EOC-Converter’s advantages over other products in the market.
Linovision EOC-Converter VS Motorola MoCA Adapter or StarTech EOC1110K Linovision EOC-Converter can transmit both PoE power and ethernet data, while MoCA adapter does not support.
Linovision EOC-Converter VS Axis T8640 or Veracity Highwire Powerstar or DUALCOMM DECA-200 Quite similar, but Linovision EOC-Converter can transmit PoE and data up to 3,300ft distance, while others is 1,000ft.
Linovision EOC-Converter VS Altronix eBridge1PCRMT Quite similar, but Linovision EOC-Converter can transmit PoE and data up to 3,300ft distance, while Altronix eBridge is 1,640ft.
Linovision EOC-Converter VS Enconn Mini-Power Quite similar, but Linovision EOC-Converter can transmit PoE and data up to 3,300ft distance, while Enconn is only 800ft.
Key Specification
Model
EOC-Converter (Receiver+Transmitter)
Function Port
1*10/100 Mbps Base-TX 1*BNC
Power Consumption
<2W
Transmission Bandwidth
RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps
PoE Protocol (EOC-Receiver)
work as a PoE Powered device, compliant to IEEE802.3af/at. Auto adaptive to PoE mode A and B from PSU (PoE Switch or PoE NVR, strongly recommend to use 30W PoE+ port)
PoE Protocol (EOC-Transmitter)
work as a PSU, provide PoE power to standard IEEE802.3af/at PoE device (48V Passive PoE, Pairs 1, 2+; 3, 6 Return)
Network Standard
IEEE802.3, IEEE802.3u, IEEE802.3x
Lightning Protection
Common Mode 4KV Differential Mode 2KV
Operating Temperature
–30°C to 65°C (–22°F to 149 °F )
Operating Humidity
5%–95%
Dimension (each) WxDxH
79mm×52mmx23mm (3.1" x 2.0" x 0.9")
Weight (each)
61g (0.134lbs)
Q&A
Q.What kind of cables can be connected between EOC transmitter and EOC receiver?
A.
It can transmitter ethernet data and POE power over coaxial cables, twist pair cables, power cables, video cables or almost any two-pin cables.
Q.Can multiple devices be connected via single coaxial cable?
A.
Yes, one pair of EOC converter can be used to transmit multiple device over single coaxial cable with NVR/POE switch/WI-FI AP. The connection will be multiple device -> NVR/POE switch/WI-FI AP -> EOC Transmitter -> Coaxial cable ->EOC Receiver -> POE NVR/POE Switch/POE Injector with internet. Please note that the EOC receiver has to be connected to an POE NVR or POE Switch to be powered.
Q.Will this work for extending connectivity between a router and an Ethernet switch? Or extending WIFI?
A.
Yes. But you need a POE injector in EOC receiver side to provide power to EOC receiver and EOC transmitter. It is recommended to use 56V 30W POE injector.
Q.What’s the maximum load capacity of this EOC Converter?
A.
The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras.
Q.What’s the maximum transmission distance of this EOC Converter?
A.
The maximum transmission distance is 3000ft. Please note that the load capacity will drop down to 4W with general DC48V injector, so it’s recommended to use 60W or 75W poe injector in the receiver side.
Q.What kind of device it can be working with?
A.
It can work with POE devices like IP cameras, POE Wi-Fi AP, VoIP phones, etc. And it can also work with non-POE device like PC/NVR, etc. And you still need a power injector to power the EOC receiver side even though don’t need poe.
Q.What POE standards does this support?
A.
It supports IEEE802.3af and IEEE802.3at standard. It can work with most of the IP cameras and mini PTZs in the market, we also have customers use this to power POE WIFI AP and it is working well.
Q.How can I mount them?
A.
It supports DIN Rail installation(Standard 35mm din rail), or you can put it inside a regular camera’s junction box, since it is very small in dimension, that is 3.1” x 2.0” x 0.9”
Q.Why my POE device is offline when working with our EOC (IP Over Coax) Converter?
A.
Several main reasons are as follow: 1. EOC transmitter has to be connected to POE device (IPC/VoIP), and EOC receiver is connected to POE supply device (POE NVR, POESwitch or POE Injector). The reverse connection will not work. 2. It is used for point-to-point coax cable direct connection only, no BNC repeater/T-connect/splitter in the middle. 3. It may be caused by insufficient load capacity. The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras or VoIP phones. 4. No power supply will also make it fail to work. Please be informed that EOC receiver has to be connected to an POE NVR, POE Switch or POE Injector to be powered.
