工业千兆 POE+ 分配器，热切换 DC12V 或 DC24V 输出，宽电压输入，IEEE802.3af/at POE 转直流电源

3D Model

x

$29.99 USD
In Stock

DC12V/DC24V/POE 24V输出 - 为非 POE 设备提供热切换 DC12V 或 DC24V 电源；与 POE 24V 适配器（包含在包装内）一起使用时，可为 24V POE 设备（例如无线 AP/网桥）提供 POE 24V。（注意：一次只能输出一个）
千兆速度 - 支持10/100/1000Mbps传输速度。最大传输距离100米。
两个直流端子 - 提供 DC 连接器和绿色端子（一次一个 DC 输出），最大功率输出为 25W。
工业设计 - PoE 36V~60V 输入（最大 30W），-40°C~75°C 工作温度；6KV 防雷和 3 级 ESD 保护；含壁挂支架；信号和电源隔离设计，避免信号干扰。

应用

适用于恶劣环境，广泛用于安全摄像头、无线AP、门禁设备、对讲机、物联网设备和工业设备。

SKU: POE-Splitter1224

Datasheet Manual Video

Ship from China warehouse, normally ship out in one business day.

By default Express ship by FedEx or DHL, the typical delivery time is less than one week.

Import customs duty or tax may be charged and at customer's cost.

24/7 US LOCAL + GLOBAL TECH SUPPORT

Frequently bought with

工业千兆 POE+ 分配器，带 DC12V/DC24V/POE 24V 输出

$29.99 USD

-

+

90W 千兆 POE 注入器，IEEE 802.3af/at/bt 单端口 PoE++

$39.00 USD

-

+

工业级 8 端口全千兆 BT 90W PoE 交换机，带 2 个 SFP 上行链路

$79.00 USD

-

+

5 端口 DC12-48V 输入全千兆 POE 交换机带升压器

$79.00 USD

-

+

The bundle

This Item

x1

+

This item

工业千兆 POE+ 分配器，带 DC12V/DC24V/POE 24V 输出

$29.99 USD

-

+

Frequently bought with

90W 千兆 POE 注入器，IEEE 802.3af/at/bt 单端口 PoE++

$39.00 USD

-

+

工业级 8 端口全千兆 BT 90W PoE 交换机，带 2 个 SFP 上行链路

$79.00 USD

-

+

5 端口 DC12-48V 输入全千兆 POE 交换机带升压器

$79.00 USD

-

+

概述主要规格比较问答资源评论

LINOVISION 工业千兆 POE+ 分配器，带 DC12V/DC24V/POE 24V 输出、宽电压输入、IEEE802.3af/at POE 转 DC 电源，适用于安全摄像头、无线 AP、门禁系统

突出特点

2 种直流输出端口

提供 DC 连接器和绿色端子（一次一个 DC 输出），最大功率输出为 25W。

DC12V/DC24V/POE 24V输出

POE 分离器可配置为 DC12V 或 DC24V 或 POE 24V 输出。POE 24V 需要与 POE 24V 适配器一起使用，该适配器包含在包装中。

千兆速度

支持10/100/1000Mbps传输速度，最大传输距离100米（328英尺）。

紧凑型设计

体积小，安装方便，符合MIT机架及壁挂安装

双重隔离更安全

采用信号与电源变压器隔离设计，避免因非隔离造成信号干扰及用电设备烧毁

工业设计

支持POE 36V~60V宽电压输入（最大30W）；
工业芯片及铝外壳；
工作温度-40℉~167℉；
6KV防雷和3级ESD保护

连接图

为非 POE 设备提供热切换 DC12V 或 DC24V 电源；与 POE 24V 适配器（包含在包装内）一起使用时，可为 24V POE 设备（如无线 AP/网桥）提供 POE 24V。（注意：一次只能输出一个）

包装与安装

主要规格

Model	POE-Splitter1224
PoE In	1×RJ45
Data Out	1×RJ45
DC Out	1×green terminal 1×DC connector(*alternative）
Grounding	Grounding Terminal
Protocol	IEEE803.2af/at
Power Supply	Support Mode A (End-Span) and Mode B (Mid-Span)
Power Requirements	PoE36V~60V 30W(max)
Power Consumption	≤25.4W
Output power	DC 12V/24V by DIP switch control
Output Ripple	<5%
Transmission Distance	100m
Transmission Speed	10/100/1000Mbps
Transmission Medium	Cat5/5e/6 Standard Network Cable
Input PoE Power	1 (PoE IN Port RJ45 Yellow Light)
Output DC Power	1 (Ethernet Port RJ45 Yellow Light)
ESD	3 level, Standard:IEC61000-4-2
Dimension (L×W×H)	3.23"x2.48"x0.98" (82×63×25mm)
Material	Aluminum
Weight	0.4lb (180g)

比较

LINOVISION POE Splitter Selection Guide

		Learn more >	Learn more >	Learn more >	Learn more >	Learn more >	Learn more >	Learn more >
Model	POE-Splitter1224	POE-SP30	POE-SP02BT	POE-SP02BT-POE	POE-SP01 (2 pack)	POE-SP01P (2 pack)	POE-SP01C (2 pack)	POE-USBC01
PoE Input	IEEE803.2af/at Max 30W	IEEE803.2af/at Max 30W	IEEE802.3af/at/bt Max 90W	IEEE802.3af/at/bt Max 90W	IEEE803.2af/at Max 30W	IEEE803.2af/at Max 30W	IEEE803.2af Max 15W	IEEE802.3af/at Max 20W
Output1	DC12/24V/POE24V output	DC 5/9/12/18V switchable output	DC 24V output	DC 5/9/12/24V switchable output	DC 12V output	DC 12V output	USB-C output	USB-C output
Output2	/	/	DC 5/9/12/20V switchable output	48V POE (Active PoE）	/	/	/	/
Network Speed	Gigabit	Gigabit	Gigabit/2.5Gbps	Gigabit	10/100Mbps	10/100Mbps	10/100Mbps	10/100Mbps
Waterproof	/	/	/	/	/	✔	/	/
Installation	DIN-Rail/ Wall-Mount	Wall-Mount	DIN-Rail/ Wall-Mount	DIN-Rail/ Wall-Mount	/	/	/	/

问答

Q.选择 12V 时，直流输出电流是多少？

A.

本产品在选择12v的时候直流输出电流为2A。

Q.DC 连接器（圆形）的尺寸是多少？

A.

它是 5.5x2.1mm。

Q.它可以安装在 DIN 导轨上吗？

A.

此 POE 分离器目前不支持 DIN 导轨安装。它支持壁挂式安装，包装内含壁挂式支架。

Works exactly as advertised

Looking to power a TP-Link CPE510 or CPE210 24 VDC wireless bridge unit from standard 48 VDC PoE+ 802.3af/at, such as a Ubiquiti PoE+ Ethernet switch? Look no further. Well engineered; includes all the bits and pieces you'll need to accomplish this neatly and cleanly. Great unit.

Splitter perfetto

Per ora fa il suo ottimamente. Perfettamente dimensionato per restare nella cassetta di derivazione ad alimentare un router dal POE. Leggero, piccolo, non scalda.

Works as advertised

It works great and does exactly what it is supposed to. If I had to complain about anything, it would be that the tiny screws were missing to install the din rail mount.

Optimal power

This PoE splitter is brilliant. I use it to power a Raspberry Pi CM4 carrier board which acts as my modem. I also (against advice, but I looked at power ratings & it's in tolerance) wired my optical network terminal to the second power outlet. My PoE switch is connected to a UPS so in the event of a black out my modem and ONT are kept running so I can at least still use WiFi on tablet or phone.
Highly recommended.

Works well, but only outputs 23W

The application I have (outdoor audio system) needs as much power as possible for peak power situations. This PoE splitter from LINOVISION is advertised as supporting a max of 25W. Unfortunately, it shuts down above 23W.

I always thoroughly test PoE devices prior to putting them into service, as I've had devices fail in the past and take out other devices in the system. I have two different styles of PoE 802.3bt injectors (one that is a midspan and one that is a switch). Both have been tested extensively and appear to properly comply with the 802.3bt standard, so I use them as a PSE (power sourcing equipment) for PoE device testing.

I have a power load tester that has a digitally-controllable load. While it isn't a "calibrated" device, I have verified using other devices (e.g., Fluke multimeters) that it accurately measures DC current and voltage, and therefore properly calculates power draw. Using this tester, I found that this LINOVISION PoE splitter shuts down once you cross over 23W (0.96A at 24VDC). Most of the other brands of splitters that I have tested have had 5-10% of overhead above their advertised rated output (e.g., a 25W output might work up to 26-27W before cutting out. Not so with the LINOVISION, at least not with the unit I received. I'm going to return it for a replacement to see if another one performs to spec.

Otherwise, the product seems to work as advertised (12V/24V hot switch, Gigabit connectivity, proper negotiation on 802.3af/bt).

1 2 3

工业千兆 POE+ 分配器，带 DC12V/DC24V/POE 24V 输出

突出特点

连接图

包装与安装

Customer Reviews

你也许也喜欢

关于 Linovision

主菜单

商店帮助

突出特点

连接图

包装与安装

Customer Reviews

你也许也喜欢

Translation missing: zh-CN.general.language

Currency