DC12V 防水 POE 分配器,户外以太网供电分配器
In Stock
LINOVISION DC12V 防水 POE 分配器,10/100Mbps 户外以太网供电分配器,IEEE802.3af/at POE 至 DC 电源,适用于安全摄像头、无线 AP、VolP 电话
带直流连接器的直流输出
配备DC12V连接器,可连接不同DC端口的设备;DC连接器还可同时为2个DC12V设备供电
防水设计
POE端口采用防水插头设计,确保POE Spitter在户外安全运行。
兼容更多POE供电设备
该电位器分配器使用所有 8 个引脚来传输电位器电源,因此它兼容 PoE 模式 A 和 PoE 模式 B,而一些 PoE 分配器可与一种电位器电源设备模式配合使用。
让直流设备运行更稳定、更安全
4KV浪涌保护,支持短路、过流和过温保护,3500V高压隔离,分离器可以让您的设备运行更稳定、更安全。
Model | POE-SP01P |
---|---|
Hardware Specifications | |
Interface |
PoE in Port: 1 x 10/100BASE-T Ethernet POE PD In PoE out port : 1x 10/100BASE-T Ethernet and 1 DC 12V Out |
Ethernet Port | Ethernet port can support 10/100Base-TX auto-sensing, full/half duplex MDI/MDI-X self-adaption |
Network Cable | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) |
Transmission Bandwidth (Rate) | 10/100Mbps |
Dimension (L*W*H) | 90*20*20mm, cable length:≤120mm |
Weight | 0.1kg |
Power over Ethernet (PoE) Specifications | |
PoE Standard | PoE in Port:IEEE 802.3af/at PoE PD |
Input Voltage | 44-57VDC |
Power Pin Assignment | 1/2 (+), 3/6 (-) & 4/5 (+), 7/8 (-) |
Output Voltage | Default 12VDC± 1.5V, optional 5V,9V,24VDC Default DC5521 plug |
Power Consumption | Standby<1W, Full Load<15W |
Standards Conformance | |
Standards Compliance | IEEE 802.3 Ethernet |
IEEE 802.3u Fast Ethernet | |
IEEE 802.3x Flow Control | |
IEEE 802.3af Power over Ethernet | |
IEEE 802.3at Power over Ethernet Plus | |
Stability Testing | IEC 60068-2-32 (Free fall) |
IEC 60068-2-27 (Shock) | |
IEC 60068-2-6 (Vibration) | |
Temperature | Operating: -20~55 degrees C |
Storage: -40~75 degrees C | |
Humidity | Operating: 5~90%, (non-condensing) |
Storage: 5~90% (non-condensing) | |
Regulatory Compliance | FCC Class A, CE Class A |
LINOVISION POE Splitter Selection Guide
Learn more >
|
Learn more >
|
Learn more >
|
Learn more >
|
Learn more >
|
|
Learn more >
|
Learn more >
|
|
---|---|---|---|---|---|---|---|---|
Model | POE-Splitter1224 | POE-SP30 | POE-SP02BT | POE-SP02BT-POE | POE-SP01 (2 pack) |
POE-SP01P (2 pack) |
POE-SP01C (2 pack) |
POE-USBC01 |
PoE Input | IEEE803.2af/at Max 30W |
IEEE803.2af/at Max 30W |
IEEE802.3af/at/bt Max 90W |
IEEE802.3af/at/bt Max 90W |
IEEE803.2af/at Max 30W |
IEEE803.2af/at Max 30W |
IEEE803.2af Max 15W |
IEEE802.3af/at Max 20W |
Output1 | DC12/24V/POE24V output | DC 5/9/12/18V switchable output |
DC 24V output | DC 5/9/12/24V switchable output |
DC 12V output | DC 12V output | USB-C output | USB-C output |
Output2 | / | / | DC 5/9/12/20V switchable output |
48V POE (Active PoE) |
/ | / | / | / |
Network Speed | Gigabit | Gigabit | Gigabit/2.5Gbps | Gigabit | 10/100Mbps | 10/100Mbps | 10/100Mbps | 10/100Mbps |
Waterproof | / | / | / | / | / | ✔ | / | / |
Installation | DIN-Rail/ Wall-Mount |
Wall-Mount | DIN-Rail/ Wall-Mount |
DIN-Rail/ Wall-Mount |
/ | / | / | / |