4G |
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B17/B18/B19/B20/B25/B26/B28/B66 LTE TDD: B34/B38/B39/B40/B41 |
3G |
WCDMA/HSPA: B1/B2/B4/B5/B8 |
GSM |
GSM/GPRS/EDGE: B2/B3/B5/B8 |
Processor |
Industrial grade 32-bit processor |
DRAMCapacity |
64MB (expandable to 128MB) |
FlashCapacity |
16MB(expandable to32MB) |
Operating System |
PanGu OS(Linux-based fully customizable) |
SIM/UIMCard Interface |
Standard drawout interfaceSupport 1.8V/3V SIM/UIMcardBuilt-in 15KV ESD protection |
Serial port |
5PIN terminal connector Hardware version.A: 1*RS232/RS485 (choose RS232 or RS485 as needed, can not be connected at the same time) Hardware version.B: 1*RS232、1*RS485 Support MQTT protocol |
Ethernet interface |
1*FE LAN 10/100Mbit/s adaptive, built-in 1.5KV magnetic isolation protection |
Wi-Fi |
Support IEEE 802.11n b/g/n 2.4GHZ Support AP/Client mode Support open system, shared key, WPA/WPA2 authentication Support WEP/TKIP/AES encryption |
Antenna |
2 external antenna interfaces (standard SMA female connector, 50 ohm characteristic impedance), 1 4G antenna, 1 WiFi antenna (optional) |
LEDIndicator |
PWR*1ETH*1SYS*1NET*1 |
Power Interface |
Terminal power base, built-in power reverse phase protection and overvoltage protection |
Reset Button |
Through this button, the parameter configuration of the device can be restored to the factory value |
Real Time Clock |
Built-in RTC, battery powered |
Standard Power Supply |
DC 12V/1A |