DC12V Waterproof POE Splitter, Outdoor Power Over Ethernet Splitter
In Stock
LINOVISION DC12V Waterproof POE Splitter, 10/100Mbps Outdoor Power Over Ethernet Splitter, IEEE802.3af/at POE to DC Power Supply for Security Cameras,Wireless AP, VolP Phone
DC Output with DC Connector
Comes with a DC12V connectors for connecting devices of different DC port;DC Connector can also power 2 DC12V devices at the same time
Waterproof Design
POE port design with waterproof plug, ensure POE Spitter operating safely outdoor.
Compatible with More POE Supply Devices
This Pot Splitter uses all 8 pins to transmit Pot Power, so it is compatible to both PoE Mode A and Poe Mode B, while some PoE Splitter are working with one mode of Pot Power Supply Devices.
Run DC Devices More Stable and Safer
4KV surge protection, Support short circuit, over current and over temperature protection, 3500V high-voltage isolation, the splitters could run your devices more stable and safer.
Model | POE-SP01P |
---|---|
Hardware Specifications | |
Interface |
PoE in Port: 1 x 10/100BASE-T Ethernet POE PD In PoE out port : 1x 10/100BASE-T Ethernet and 1 DC 12V Out |
Ethernet Port | Ethernet port can support 10/100Base-TX auto-sensing, full/half duplex MDI/MDI-X self-adaption |
Network Cable | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) |
Transmission Bandwidth (Rate) | 10/100Mbps |
Dimension (L*W*H) | 90*20*20mm, cable length:≤120mm |
Weight | 0.1kg |
Power over Ethernet (PoE) Specifications | |
PoE Standard | PoE in Port:IEEE 802.3af/at PoE PD |
Input Voltage | 44-57VDC |
Power Pin Assignment | 1/2 (+), 3/6 (-) & 4/5 (+), 7/8 (-) |
Output Voltage | Default 12VDC± 1.5V, optional 5V,9V,24VDC Default DC5521 plug |
Power Consumption | Standby<1W, Full Load<15W |
Standards Conformance | |
Standards Compliance | IEEE 802.3 Ethernet |
IEEE 802.3u Fast Ethernet | |
IEEE 802.3x Flow Control | |
IEEE 802.3af Power over Ethernet | |
IEEE 802.3at Power over Ethernet Plus | |
Stability Testing | IEC 60068-2-32 (Free fall) |
IEC 60068-2-27 (Shock) | |
IEC 60068-2-6 (Vibration) | |
Temperature | Operating: -20~55 degrees C |
Storage: -40~75 degrees C | |
Humidity | Operating: 5~90%, (non-condensing) |
Storage: 5~90% (non-condensing) | |
Regulatory Compliance | FCC Class A, CE Class A |
LINOVISION POE Splitter Selection Guide
Learn more >
|
Learn more >
|
Learn more >
|
Learn more >
|
Learn more >
|
|
Learn more >
|
Learn more >
|
|
---|---|---|---|---|---|---|---|---|
Model | POE-Splitter1224 | POE-SP30 | POE-SP02BT | POE-SP02BT-POE | POE-SP01 (2 pack) |
POE-SP01P (2 pack) |
POE-SP01C (2 pack) |
POE-USBC01 |
PoE Input | IEEE803.2af/at Max 30W |
IEEE803.2af/at Max 30W |
IEEE802.3af/at/bt Max 90W |
IEEE802.3af/at/bt Max 90W |
IEEE803.2af/at Max 30W |
IEEE803.2af/at Max 30W |
IEEE803.2af Max 15W |
IEEE802.3af/at Max 20W |
Output1 | DC12/24V/POE24V output | DC 5/9/12/18V switchable output |
DC 24V output | DC 5/9/12/24V switchable output |
DC 12V output | DC 12V output | USB-C output | USB-C output |
Output2 | / | / | DC 5/9/12/20V switchable output |
48V POE (Active PoE) |
/ | / | / | / |
Network Speed | Gigabit | Gigabit | Gigabit/2.5Gbps | Gigabit | 10/100Mbps | 10/100Mbps | 10/100Mbps | 10/100Mbps |
Waterproof | / | / | / | / | / | ✔ | / | / |
Installation | DIN-Rail/ Wall-Mount |
Wall-Mount | DIN-Rail/ Wall-Mount |
DIN-Rail/ Wall-Mount |
/ | / | / | / |