• LAYER 2 MANAGED PoE SWITCH - 8 x 10/100/1000Mbps RJ-45 ports + 2 x 1G/2.5Gbps SFP uplinks. Supports VLAN, QoS, Link Aggregation, PoE Management, and per-port control. Manage via Web, CLI, or SNMP.
• 99% Efficient MPPT Controller - Built-in MPPT solar charge controller, working directly with PV solar panels and batteries to supply non-stop PoE power. Maximum Power Point Tracker charging technology with up to 99% tracking efficiency and 98% peak PV conversion efficiency.
• DC12~57V WIDE VOLTAGE INPUT - Dual redundant DC12~57V input channels. It is designed for reliable PoE power output in solar power systems, vehicles or other applications that without AC power input.
• 90W BT PoE - Fully IEEE 802.3af/at compliant; ports 1-4 support 802.3bt 90W / Passive 54V (30W), ports 5-8 support 802.3at 30W / Passive 24V (15W). Total PoE budget 240W @ 57V, or 120W @ 24V, or 60W @ 12V.
• Easy Cabling - Secure and convenient cabling for all power and load devices. XT60 for battery and PV panels, and UPS input for DC backup systems. Provides RS485 Serial Data Input, supports IoT sensors like humidity, smoke, and light control.
• Passive 54V/24V PoE Output and 24V DC Output- Each port can be individually switched via Web or CLI between Passive and standard PoE modes, with per-port power monitoring; ideal for wireless APs, wireless bridges, or other devices that accept 54V/24V Passive PoE—no extra PoE injector needed. Provides 12V/24V DC,  for Non-POE IP cameras, access reader terminals, IP speakers, Routers, etc.
• PoE Watchdog and P-PoE - Its PoE watchdog technology enables continuously monitoring PoE ports and automatically reboot PD device if it is freezing, and the Perpetual PoE ensure non-stop PoE supplying even if the switch is restarting.
• Marvell Chipset & High Security - Built on a Marvell chipset for high-performance, stable, and reliable delivery with advanced network management features. 4-Stage Safely Charging & well designed protections, including over charging, over discharging, PV short circuit, PV current is too high, load failure, battery reverse polarity, etc.
• Fanless Industrial Design - Designed for harsh environment, 6KV surge protection, 8KV ESD protection, working environment (-40℃ ~ +75℃ or -40 ℉ ~ +167 ℉)

Application

• Offer standard POE supply in solar power system (DC12V/DC18V/DC36V input)
  
• RV/Vehicle/Truck/Bus system (DC12V input) where need POE ports
  
• Suitable for UPS system (DC24V input) which need standard POE output
  
• Does not support any GPS function.